Skip to content
English - United States
Sign in
Contact us
  • There are no suggestions because the search field is empty.

What safety precautions should I follow when using a Printomize DTF cutter?

Essential safety guidelines for operating a Printomize DTF cutter, including blade handling, electrical precautions, environmental requirements, and emergency procedures.

Overview

Following proper safety procedures is critical when operating a Printomize DTF cutter. These machines use sharp blades, moving mechanical parts, and electrical power that can cause injury or equipment damage if handled improperly.

The guidelines below summarize the most important safety rules from the official DTF cutter user manual

General Safety Rules

  • Do not allow children or untrained individuals to operate or touch the cutter.

  • Read all safety instructions before operating the machine.

  • Keep this information accessible for reference during operation.

Blade & Moving Parts Safety

  • Never touch the cutter blade with bare hands.

  • Do not touch the cutter blade while cutting is in progress.

  • Keep hands, hair, jewelry, and loose clothing away from moving parts.

  • Move the tool carriage slowly when adjusting it manually.

  • Sudden movement may damage internal components or cause injury.

Electrical & Power Safety

  • Ensure the cutter is properly grounded before use.

  • Do not operate the cutter if the power cord is damaged.

  • Never connect the cutter to a non-rated or unstable power supply.

  • Do not unplug cables by pulling on the cord—always grip the plug.

  • Avoid power outlets with dust or metal debris buildup.

Environmental Safety

  • Do not expose the cutter to water, rain, or high humidity.

  • Avoid placing the cutter in direct sunlight or near heat sources.

  • Keep the cutter away from strong lighting that may interfere with sensors.

  • Do not place the cutter on uneven, vibrating, or inclined surfaces.

  • Provide sufficient space around the cutter to avoid accidental contact.

Cleaning, Maintenance & Modifications

  • Do not lubricate cutter mechanisms unless explicitly instructed.

  • Do not clean the cutter using volatile solvents such as thinner or benzene.

  • Do not disassemble, modify, or repair the cutter yourself.

  • Unauthorized repairs may cause damage and void warranty coverage.

Emergency Situations

Immediately power off and unplug the cutter if:

  • Smoke is detected

  • An unusual odor occurs

  • Abnormal sounds or overheating are observed

After confirming the issue has stopped, contact Printomize America Support for assistance. Do not resume operation until the issue is resolved.

Important Reminder

Improper operation or ignoring safety guidelines can result in:

  • Personal injury

  • Cutter damage

  • Reduced cutting accuracy

  • Electrical hazards

Always operate the DTF cutter according to recommended safety standards

Printomize DTF Cutter User Manu…